All core22 KDE snaps are broken. There is not an easy fix. We have used kde-neon repos since inception and haven’t had issues until now.
libEGL fatal: DRI driver not from this Mesa build (‘23.2.1-1ubuntu3.1~22.04.3’ vs ‘23.2.1-1ubuntu3.1~22.04.2’)
Apparently Jammy had a mesa update?
Option 1: Rebuild our entire stack without neon repos ( fails due to dependencies not in Jammy, would require tracking down all of these and build from source )
Option 2: Finish the transition to core24 ( This is an enormous task and will take some time still )
Either option will take more time and effort than I have. I need to be job hunting as I have run out of resources to pay my bills. My internet/phone will be cut off in days. I am beyond stressed out and getting snippy with folks, for that I apologize. If someone wants to sponsor the above work then please donate to https://gofund.me/fe30793b otherwise I am stepping away to rethink life and my defunct career.
I must ask for help, I successfully completed my treatment, but the cost of gas has depleted my reserves. I have been unable to find work as I cannot drive with my broken arm and no one will hire a one armed software engineer! As you can see I am still quite capable, so if you know anyone that will give me a chance, please contact me! Any help is appreciated, donations will go to internet costs, food, medical expenses, and gas to continued doctor/hospital visits. Thank you! https://gofund.me/d5d59582
I have released more core24 snaps to –edge for your testing pleasure. If you find any bugs please report them at bugs.kde.org and assign them to me. Thanks!
I hate asking but I am unemployable with this broken arm fiasco and 6 hours a day hospital runs for treatment. If you could spare anything it would be appreciated! https://gofund.me/573cc38e
I hate asking but I am unemployable with this broken arm fiasco and 6 hours a day hospital runs for treatment. If you could spare anything it would be appreciated! https://gofund.me/573cc38e
I hope everyone had a wonderful holiday! Your present from me is shiny new application snaps! There are several new qt6 ports in this release. Please visit https://snapcraft.io/store?q=kde
I have also fixed the Krita snap unable to open/save bug. Please test –edge!
I am continuing work on core24 support and hope to be done before next release.
I do look forward to 2025! Begone 2024!
If you can help with gas, I still have 3 weeks of treatments to go. Thank you for your continued support.
I am still here. Sadly while I battle this insane infection from my broken arm I got back in July, the hackers got my blog. I am slowly building it back up. Further bad news is I have more surgeries, first one tomorrow. Furthering my current struggles I cannot start my job search due to hospitalization and recovery. Please consider a donation. https://gofund.me/6e99345d
On the open source work front, I am still working on stuff, mostly snaps ( Apps 24.08.3 released )
Thank you everyone that voted me into the Ubuntu Community Council!
I am trying to stay positive, but it seems I can’t catch a break. I will have my computer in the hospital and will work on what I can. Have a blessed day and see you soon.
Sorry my blog updates have been MIA. Let me tell you a story…
As some of you know, 3 months ago I was in a no fault car accident. Thankfully, the only injury was I ended up with a broken arm. ER sends me home in a sling and tells me it was a clean break and it will mend itself in no time. After a week of excruciating pain I went to my follow up doctor appointment, and with my x-rays in hand, the doc tells me it was far from a clean break and needs surgery. So after a week of my shattered bone scraping my nerves and causing pain I have never felt before, I finally go in for surgery! They put in a metal plate with screws to hold the bone in place so it can properly heal. The nerve pain was gone, so I thought I was on the mend. Some time goes by and the swelling still has not subsided, the doctors are not as concerned about this as I am, so I carry on until it becomes really inflamed and developed fever blisters. After no success in reaching the doctors office my husband borrows the neighbors car and rushes me to the ER. Good thing too, I had an infection. So after a 5 day stay in the hospital, they sent us home loaded with antibiotics and trained my husband in wound packing. We did everything right, kept the place immaculate, followed orders with the wound care, took my antibiotics, yet when they ran out there was still no sign of relief, or healing. Went to doctors and they gave me another month supply of antibiotics. Two days after my final dose my arm becomes inflamed again and with extra spectacular levels of pain to go with it. I call the doctor office… They said to come in on my appointment day ( 4 days away ). I asked, “You aren’t concerned with this inflammation?”, to which they replied, “No.”. Ok, maybe I am over reacting and it’s all in my head, I can power through 4 more days. The following morning my husband observed fever blisters and the wound site was clearly not right, so once again off we go to the ER. Well… thankfully we did. I was in Sepsis and could have died… After deliberating with the doctor on the course of action for treatment, the doctor accepted our plea to remove the plate, rather than tighten screws and have me drive 100 miles to hospital everyday for iv antibiotics (Umm I don’t have a car!?) So after another 4 day stay I am released into the world, alive and well. I am happy to report, the swelling is almost gone, the pain is minimal, and I am finally healing nicely. I am still in a sling and I have to be super careful and my arm was not fully knitted. So with that I am bummed to say, no traveling for me, no Ubuntu Summit 🙁
I still need help with that car, if it weren’t for our neighbor, this story would have ended much differently.
Another loss last week of a friend. I am staying strong and working through it. A big thank you to all of you that have donated to my car fund, I still have a long way to go. I am not above getting a cheap old car, but we live in sand dunes so it must be a cheap old car with 4×4 to get to my property. A vehicle is necessary as we are 50 miles away from staples such as food and water. We also have 2 funerals to attend. Please consider a donation if my work is useful to you. https://gofund.me/1e784e74 All of my work is currently unpaid work, as I am between contracts. Thank you for your consideration. Now onto the good stuff, last weeks work. It was another very busy week with Qt6 packaging in Debian/Kubuntu and KDE snaps. I also have many SRUs for Kubuntu Noble .1 release that needs their verification done.
Kubuntu:
See Debian for the qt6 Plasma / applications work.
Thankfully no tragedies to report this week! I thank each and everyone of you that has donated to my car fund. I still have a ways to go and could use some more help so that we can go to the funeral. https://gofund.me/033eb25d I am between contracts and work packages, so all of my work is currently for free. Thanks for your consideration.
Another very busy week getting qt6 updates in Debian, Kubuntu, and KDE snaps.
Kubuntu:
Merkuro and Neochat SRUs have made progress.
See Debian for the qt6 Plasma / applications work.
Debian:
qtmpv – in NEW
arianna – in NEW
kamera – experimental
libkdegames – experimental
kdenetwork-filesharing – experimental
xwaylandvideobridge – NEW
futuresql – NEW
kpat WIP
Tokodon – Done, but needs qtmpv to pass NEW
Gwenview – WIP needs kamera, kio-extras
kio-extras – Blocked on kdsoap in which the maintainer is not responding to bug reports or emails. Will likely fork in Kubuntu as our freeze quickly approaches.
KDE Snaps:
Updated QT to 6.7.2 which required a rebuild of all our snaps. Also found an issue with mismatched ffmpeg libraries, we have to bundle them for now until versioning issues are resolved.
Made new theme snaps for KDE breeze: gtk-theme-breeze, icon-theme-breeze so if you use the plasma theme breeze please install these and run
for PLUG in $(snap connections | grep gtk-common-themes:icon-themes | awk '{print $2}'); do sudo snap connect ${PLUG} icon-theme-breeze:icon-themes; done
for PLUG in $(snap connections | grep gtk-common-themes:gtk-3-themes | awk '{print $2}'); do sudo snap connect ${PLUG} gtk-theme-breeze:gtk-3-themes; done
for PLUG in $(snap connections | grep gtk-common-themes:gtk-2-themes | awk '{print $2}'); do sudo snap connect ${PLUG} gtk-theme-breeze:gtk-2-themes; done
This should resolve most theming issues. We are still waiting for kdeglobals to be merged in snapd to fix colorscheme issues, it is set for next release. I am still working on qt6 themes and working out how to implement them in snaps as they are more complex than gtk themes with shared libraries and file structures.
Please note: Please help test the –edge snaps so I can promote them to stable.